Projects
The kind of work we do.
Lifts, compressor rooms and full service bays, installed to run every day.
Before and after
Drag the slider to compare each bay before and after the lift went in.




Project write-ups
How each kind of job goes, with photos from several angles.
Sample projectTwo-post lift install
A general repair shop swapped an old, worn lift for a new two-post lift in its busiest bay. Here is how a job like this goes, step by step.
Read the project
Sample projectFour-post alignment lift install
A tire and alignment shop added a four-post drive-on lift so it could stop sending alignment work down the street. A look at what it takes to get one right.
Read the project
Sample projectScissor lift install
A quick-service and tire shop wanted a lift that stays out of the way when it is not in use. A scissor lift fit, and a flush mount made the floor look like it was never there.
Read the project
Sample projectCompressor room
Pressure drops, wet air and a noisy compressor in the middle of the shop. A new compressor room fixed all three and gave every bay steady, clean air.
Read the project
Sample projectFull service-bay build-out
A shop moved into a larger building and needed every bay laid out, equipped and working. A look at planning a service bay from an empty floor.
Read the projectHave a bay like this in mind?
Tell us about your shop and we will recommend the right setup.
Request a quote
AI-generated sample images for this demo, to be replaced with photos of our own installs.
Planning a new bay or replacing a lift?
Tell us your shop type, number of bays and ceiling height. We will come back with a recommendation, not a catalog.
Or call (915) 268-7878